HifiSpeaker.wiki | Recent Update | Privacy-Policy | About Us | Contact

ADC 10 E mkII



Share
Pin
Send
Share
Send
Share

Brand: ADC

The ADC 10 E mkII (Analog-to-Digital Converter) is a high-performance device designed to convert analog signals into digital format. It is the second generation (mark II) of the ADC 10 E series, which has been significantly improved in terms of technical specifications.Here are some key features and benefits of the ADC 10 E mkII:1. Wider input range: The ADC 10 E mkII supports an input range from -10V to +10V, which is double the input range of its predecessor (ADC 10 E mkI). This expanded input range allows for greater flexibility in terms of signal sources.2. Higher sampling rate: The ADC 10 E mkII can operate at sampling rates up to 500MS/s, which is faster than its predecessor's maximum sampling rate of 250MS/s. This enables better time resolution and improved signal fidelity.3. Improved resolution: The ADC 10 E mkII has a resolution of 16 bits, which is the same as the ADC 10 E mkI, but the improved signal-to-noise ratio (SNR) enables better accuracy and lower noise floor.4. Enhanced filtering: The ADC 10 E mkII includes improved filtering functionality, including programmable decimation filters and low-pass filters. This allows for the removal of unwanted noise and improved signal quality in applications where analog signals may be prone to interference.5. Compact and power-efficient design: The ADC 10 E mkII has a small form factor and utilizes low-power consumption. This makes it an excellent choice for embedded applications where space and power consumption are significant constraints.Overall, the ADC 10 E mkII offers a significant improvement in its technical specifications, making it an attractive choice for a wide range of analog-to-digital conversion applications where high resolution, fast sampling rates, expanded input range, and improved filtering are required.



  • Type: Induced Magnet
  • Output Voltage: mV
  • Freq Response: 20Hz - 23kHz
  • Tracking Force: 0.5 - 1.5 g
  • Mass: 6.55 g
  • Channel Separation: 23 dB
  • Channel Balance: 2 dB
  • Load Impedance: 47k Ω
  • Output Impedance:
  • Stylus: R15E
  • Stylus Tip: 0.3 x 0.7 mil Elliptical
  • Cantilever:
  • Dynamic Compliance: x 10-6cm/Dyne
  • Static Compliance:
  • Price: $117

ADC 10 E mkII

ADC 10 E mkII

ADC 10 E mkII

ADC 10 E mkII

ADC 10 E mkII

ADC 10 E mkII



Share
Pin
Send
Share
Send
Share